Ecospec’s ScaMag system effectively controls scaling and corrosion in the boiler without utilizing any chemicals. Through the patented Ultra Low Frequency (ULF) wave treatment, aragonite and non-porous magnetite (Fe3O4) are produced, acting as a long-term protective layer against corrosion.
The Number 1 Solution to Boiler Scaling control
Scaling Control
Due to the unique pulsating effect of ULF (Ultra-Low Frequency) to the water, the traditional problem of hard calcite scale are prevented from bonding to the condenser tubes and are then transformed into powdery form that can easily be removed by flushing.
BEFORE
(Chemical Treatment)
AFTER
(Ultra-Low Frequency)
Actual Results
While the non-adhering powdery aragonite is easily removed unlike the conventional adhering hard calcite scales, magnetite attaches strongly to steel surfaces, acting as a long-term protective layer against corrosion.
This unique system offers both water and energy savings and since no chemical is involved, there is no discharge water quality problems, reducing potential environmental, safety and health issues. Descaling effect in old boilers can be obviously seen from 3rd months after installation.
BEFORE
(Chemical Treatment)
Internal boiler photos after chemical treatment and washing. Note that there is orange-brownish corrosion and scaling on the surface. Operator of this boiler testified the difficulty in scraping the corrosion and scale off the interior walls & tubes of the boiler resulting in heavy labor.
AFTER
(Ultra-Low Frequency Treatment)
Photos of the same boiler after the Scamag Ultra-Low Frequency Treatment. As shown above, the red cast iron is now visible and the soft scaling (result of the ULF treatment) easy falls of to expose the interior boiler metal’s color.
The soft scaling inside the boiler’s interior are easily removed through high pressure washing with water and light scraping with no use of chemicals. The scales are so soft, it can even be wiped of with bare hands.
After pressure washing with water, the soft scale has easily been washed off leaving no trace of any scaling. No scaling formation in the inside diameter of the tubes are also observed.
Benefits of Using ScaMag
Reap the benefits of switching to our environmental friendly and non-chemical systems utilizing Ultra-Low Frequency Technology.
- No chance of chemical contamination makes ScaMag the "Best Solution" for boiler water treatment in the food procession industries
- Does not add chemicals or Total Dissolved Solids (TDS) into boiler water resulting in less hot boiler water blow down, hence saving energy
- The unique descaling effect saves energy
- The periodic acid washing required hence preserving the equipment life and eliminating the costs of acid wash
- Save chemicals cost, no storage and handling of hazardous chemicals
- Prolongs equipment life by better by instead producing soft-scale making cleaning easier and less tasking on the equipment
- Simple installation
- Low operating electronics power cost
- Non-stop 24 hours electronics treatment
- Good Corporate Social Responsibility (CSR) image
- Non human skill dependent and no cyclical treatment performance deficiency issue
Our Easy Installation
Simple installation of a control panel, boosters, and submerged emitter rods.
Fire-Tube
Boiler
Industries:
- Laundry & Dry Cleaners
- Hospital & Healthcare
- Schools & Universities
- Food & Beverage
- Textile
Join the Green Movement
The Scamag equipment system, likewise, offers water savings due to reduced blow down, increased cycle of concentration, complete recyclability of blow down water as well as energy savings due to systems efficiency. More importantly, it eradicates the potential environmental, health and safety concerns on the use of chemicals in water treatment.